The Workhorse Hydraulic Catwalk is custom built with improvements and functions to make handling pipe easier and safer. The Workhorse Catwalk 360 is a small pipe handling platform built for the Service Rig Industry. The main frame is only 36 ft long, 4 ft wide and 42 inches tall. The trough is 40 ft long and has a 4ft removable extension to increase the length to 44 ft. The design of how the Trough is raised allows it to remain within 6 inches of the Rig Platform through the entire range of 4 ft to 18ft.
• Trailer unit design with removable axels and 5/16 ball hitch
• Gvwr 6500 lbs
• 36 ft long frame x 4 ft wide x 42 in high
• Trough length with extension – 44 ft
• 18 ft height reach
• 2,000 lb lifting capacity
• 6-1/2 in diameter pipe working capacity
• 23 second complete cycle time
• 13 gallon diesel tank
• 12 hp hatz diesel engine
• 4 hydraulic kickers
• 4 hydraulic indexers
• 4 hydraulic roll offs
• 4 manual outrigger jacks
• 3 electric jacks to remove axles
• Remote control
ABOUT WORKHORSE
The Catwalk 360 comes with a removable 6,000 lb Torflex modified axle. Three electric jacks to raise and lower unit. Each stub axle can be removed by one person and stored inside unit. Unit comes with a 4 foot lift arm extension to be used for heights above 12 feet. Four manual outrigger jacks on each corner can be used to stabilize Catwalk at raised elevations.